Custom Iron Gate Design & Fabrication

A custom gate is often the focal point of a property's entrance, and off-the-shelf options don't always fit an opening width, architectural style, or design idea. We fabricate pedestrian and driveway gates in-house so the final piece matches your property rather than the other way around.

Custom gates can be built for manual use or prepared for automation later — see our automatic gate installation page if you want opener hardware included from the start.

• Design ConsultationWe work from your ideas, property style, and opening dimensions.
• In-House WeldingGates are fabricated and welded to spec, not assembled from stock parts.
• Automation-ReadyGates can be built to accept an automatic opener now or later.
• Hardware & HangingHinges and latches are sized to the gate's actual weight and use.

How It Works

1. 1
   Design & MeasurementWe measure the opening and discuss style, security, and automation needs.
2. 2
   FabricationThe gate is cut, welded, and finished to the approved design.
3. 3
   Hardware SelectionHinges, latches, and (if applicable) opener mounts are sized to the gate.
4. 4
   Installation & AlignmentThe gate is hung, aligned, and tested for smooth operation.
5. 5
   Final WalkthroughWe confirm everything swings and latches correctly before finishing up.